Atterbury & Associates
Atterbury & Associates, Inc.
(T) 707.433.0134
(F) 707.433.0135
  • Home
  • Services
    • Civil Engineering
  • About us
  • Our Team
  • Projects
  • Blog
    • Subscribe
  • Contact Us

The Importance of Proper Septic System Design in Sonoma County

9/22/2015

14 Comments

 
Toilet Paper Roll
Designing a New Septic System in Sonoma County

Septic systems provide reliable waste management solutions for local residences, wineries, farms, small businesses, and many other Sonoma Country rural properties. When properly designed and maintained, a septic system will perform reliably for many years. The Atterbury and Associates team has vast experience in the design of septic systems for residential and commercial uses. 

A Sound System Begins With Design

Septic systems are utilized to dispose of wastewater for properties that lack convenient or realistic access to a municipal sewer system. Since many areas of Sonoma County are rural in nature, septic systems have long been utilized for wastewater disposal.   While designing septic systems, it is important to ensure that the proper site is chosen and the proper system is utilized for the subject property.

The first step in septic system design is the selection of a potential disposal site. Several potential disposal sites may need to be considered on the subject property.  Testing of the site soil’s ability to receive wastewater and measuring of distance to groundwater are crucial in determining if the potential disposal site is acceptable.  Once testing is complete and the site has been surveyed, the septic system design can begin.   Atterbury and Associates has considerable experience in all aspects of septic system design, including selecting a potential disposal site, verifying the site soil’s septic potential, mapping out the site, calculating and designing the septic system, and finally, submittal to the appropriate agency for permitting.  

Information From the Professionals

Our firm wants to ensure that each of our clients receives a well designed septic system. Our services will help accomplish this in several ways, such as:

  • Ensuring that the most efficient septic system is designed.
  • Ensuring that the septic system design meets all relevant regulations.
  • Overseeing the design and construction of a system to ensure quality at every level.
  • Verifying that the septic plans are given appropriate clearance and approval before work begins.


The Right System for Every Property

Atterbury and Associates has the skills and experience necessary to design septic systems for all types of properties.  Wastewater management is an essential part of site development and we can help make sure it is done correctly and efficiently. For more information on our services, please find us on Facebook or Google+, or subscribe to our blog.
14 Comments

Percolation Testing for Septic System Development

5/20/2015

1 Comment

 
Percolation Testing

What Is a Percolation Test?

The purpose of percolation testing is to determine the absorption rate of the soil where a septic leach field is proposed.  Water is applied to the soil and absorption time is recorded to determine an overall average rate.  A percolation test is typically performed after suitable soils have been located on site.    

How Is Testing Done? 

 A standard percolation test typically consists of the following steps: 

  1. Verify site soils are suitable for septic development and verify with a County Sanitarian.  This process includes reviewing profile holes to evaluate the texture of the soil and determine if there are any limiting conditions.  Limiting conditions include, but are not limited to, high clay content and/or low distance to groundwater. 
  2. Dig multiple percolation test holes at various depths, depending on soil conditions observed in Step #1.
  3. Insert a length of 3” perforated PVC pipe into each percolation test hole.  The percolation test hole diameter needs to be greater than the pipe diameter. Leave a small amount of pipe extending above ground and surround the bottom of the pipe with 12” of pea gravel. 
  4. Presoak the test holes adequately the day prior to the percolation test.
  5. On the day of the test, fill each pipe with water to the pea gravel and record the time filled.
  6. After one hour, measure the water level from the top of the pipe and record the results.  Continue this process for six hours, refilling the pipe to the pea gravel whenever the water level drops to within two inches from the bottom of the test hole.  If a pipe is dry after the first hour, refill to the pea gravel and take readings every ten minutes for two hours, also refilling the pipe to the pea gravel whenever the water level drops to within two inches from the bottom of the test hole. 
  7. After the test is complete, divide the time intervals by the corresponding drop in water level to discover the percolation rate in units of minutes per inch. 

Typically, soils with higher concentrations of clay will have slower percolation rates than sandy soils.  The percolation rate, once established, will play a crucial part in the next step of the process, septic system design. 

Call for Advice and Assistance

Atterbury and Associates has valuable experience in both percolation testing and site soils investigation for septic potential.   As the area’s leading civil engineering and land planning firm, we here at Atterbury and Associates are at your disposal during the planning of your next project. 

For more information on percolation testing and other geological and horticultural planning methods, please contact us at 707.433.0134, or find us on Facebook, Twitter, or Google+. You can also get updates on civil development issues by subscribing to our blog.  
1 Comment

    RSS Feed

    Categories

    All
    Civil Engineering
    Community
    Company News
    Erosion Control
    Hiring A Civil Engineer
    Land Planning
    Local Events
    Perc Testing
    Permiting
    Septic System
    Stormwater
    Subdivision Planning
    Vineyard Development
    Wells

    Archives

    July 2016
    June 2016
    May 2016
    April 2016
    March 2016
    February 2016
    January 2016
    November 2015
    October 2015
    September 2015
    August 2015
    July 2015
    June 2015
    May 2015
    April 2015
    March 2015
    January 2015
    December 2014
    November 2014
    October 2014
    September 2014
    April 2014
    March 2014

from our blog

Our Mission

To satisfy our clients and develop long-term relationships by providing quality professional engineering services, honesty, and exceeding client expectations.

GET IN Touch

16109 Healdsburg Ave., Suite D
Healdsburg, CA 95448

(T) 707.433.0134
(F) 707.433.0135
Message Us

navigate

Home
Services
About us
Our Team
Projects
Contact us

Atterburry & Associates Inc. proudly serves; Sonoma County, Napa County, Marin County, Healdsburg, Calistoga, Sebastopol, Sonoma, Ukiah, Middletown, Lake County  and Santa Rosa.

©  Copyright 2012 - Atterbury and Associates, Inc.  All rights reserved.       
Privacy
Web Design and SEO by Fitz Designz